If during installation, the washer is connected to power, but NOT connected to water, and the machine is powered up, it will not operate and the door will lock. Check the household faucets to see if the hot and cold water household water supply lines are turned on. I need more information. This action ends the fill cycle and begins the agitation phase. Diagnosis, the cold water inlet valve is faulty. Step 1 Screw on the end of a water hose to the two threaded pipes on the back of the Cabrio marked with an H and C for hot and cold.
Whirlpool Washer Does Not Fill
I go to turn it on it shows a green light on sensing and no water is coming out to start to fill it, I turn it to the rinse and spin cycle and still no water coming out, unplugged it to possibly reset it but still nothing.
Checking the Fill Hoses if the Washer is not Filling
Electrical power is routed from the timer through the water level switch to the water inlet valve. If possible, remove the inlet hoses from the back of the washer. Check the inlet screens on the back of the water inlet valve. Carollyn, I am unable to find any information on the washer model number you provided.